Hand-picked in Brazil

Quartzite Slabs

The marble look that survives real kitchens. Harder than granite, shrugs off lemon juice and wine, and every slab on our floor was hand-picked in Brazil.

Quartzite on our floor right now

These are real slabs in stock today. Every slab is one of a kind, so the one you pick is the one you get, offcuts included.

Taj Mahal Extra

48 slabs in Berkeley

Macaubas Fantasy

48 slabs in Berkeley

Fusion

32 slabs in Berkeley

Quartzite Nouveau

28 slabs in Berkeley

Mykonos

42 slabs in Berkeley

Taj Mahal Select

21 slabs in Las Vegas

Cristallo Azur D’Or

11 slabs in Las Vegas

Liki Blue

10 slabs in Las Vegas

Black Ice

17 slabs in Las Vegas

Winter Wood

8 slabs in Las Vegas

Stock counts from Evolv Surfaces Slab Shop on Sep 29, 2026. On the live site, this strip pulls from the Slab Shop automatically.

Step 1 of 2

Get quartzite slab pricing

Where is it going?

Takes 30 seconds. No obligation. ★ 4.6 on Google

Technical specifications

Property

Typical range

Mohs hardness

Porosity

0.1–0.4%

Heat resistance

Excellent

Acid / etch sensitivity

Low — tolerant to household acids and cleaning products, perfect for high traffic areas and heavy use kitchens

UV stability

Good. Interior, and exterior in most climates

Sealing

Yearly

Finishes

Polished, honed, leathered

Slab thickness

2 cm

Specified for

Kitchens and islands, vanities and showers, bar tops, hospitality surfaces, high-traffic floors

What gives quartzite its character

Quartzite begins as sandstone: quartz grains deposited by water and wind, then buried. Under heat and pressure the grains recrystallize and fuse, and the boundaries between them disappear. The stone that emerges is essentially a solid mass of interlocking quartz, which is what accounts for its hardness.

Veining in quartzite comes from mineral impurities that were present in the original sand and became mobilized during metamorphosis — iron oxides producing golds and rusts, other minerals producing greys and greens. These veins are decorative rather than structural weak points, flaws or cracks.

The visual range is wide. Some quartzites, such as Taj Mahal are prized for their soft sweeping movement. Others, like Cristallo are strongly crystalline and can be translucent. Macaubas, Mont Blanc, and Fusion sit at various points in between and can have features from both ends of the spectrum.

Choosing your slab

Hardness cuts both ways. Quartzite’s hardness makes it exceptionally durable in use, and it also takes more time to fabricate. Budget for fabrication cost and time accordingly, and use a fabricator experienced with the material. Evolv Surfaces can connect you with one.

Which finish? Polished has a mirror-like shine and helps darker spaces feel brighter. Honed is a smooth matte that works with almost any design. Leathered has texture; each stone takes to it differently, and it hides fingerprints while emphasizing the natural elements of the stone.

Waterfall edges. Quartzite is a favorite for waterfall islands because the veining can be carried around the corner in one continuous run. Ask us to pull the matching slab from the same block.

Care and Maintenance

Clean with pH-neutral stone cleaner. Quartzite does not etch with common household acids, so a spilled glass of wine or a cut lemon should not mark the surface.

Sealing is required to maintain your quartzite countertop and should be performed about once a year depending on the intensity of use for the area and the brand of sealer. Discuss sealing options and recommendations with your fabrication team prior to installation.

Quartzite tolerates direct heat well. As with any natural stone, avoid repeated extreme thermal cycling in a single spot and use of a trivet under hot pots and pans is recommended.

Marble, dolomite or quartzite?

These three are the most frequently confused stones in the showroom, because several quartzites and dolomites closely resemble white marble.

Marble

Dolomite

Quartzite

Composition

Calcium carbonate

Calcium magnesium carbonate

Quartz

Mohs hardness

3–4

3.5–4

Etches with acid

Yes

Less than marble, and more slowly

Scratch resistance

Low

Moderate

High

Look

Soft veining

Marble-like

Crystalline, dynamic, often translucent

Best for

Baths, fireplaces, feature walls, kitchens that welcome patina

A marble look with more durability

Busy kitchens, islands, bar tops

What customers say

“I can’t believe how beautiful the slabs are in the showroom.”

Rob K., Google review

“Everything was well coordinated and the communication was very good each time.”

Sophie S., Google review

“Fantastic selection of quality slabs, highly recommended.”

Shaun K., Google review

Questions people ask us

Does quartzite etch like marble?

No. Quartzite should not etch with household acids, which is the main practical difference between the two.

Is Taj Mahal a quartzite?

Yes. Taj Mahal is a highly popular quartzite quarried in Brazil. It is known for subtle, creamy, tone-on-tone bands of color and is an exceptionally easy stone to live with, both in looks and maintenance.

Does quartzite need to be sealed?

Yes, about once a year depending on how hard the area works and the brand of sealer. Discuss sealing options with your fabrication team before installation.

Is quartzite harder than granite?

Slightly. Quartzite rates around 7 on the Mohs scale against granite’s 6 to 7, and it is more uniformly hard because it is composed almost entirely of quartz.

What does a quartzite slab cost?

It depends on the stone and the slab. Tell us where it is going and we will send pricing on slabs that fit. Fabrication and installation are quoted separately by your fabricator.

Every slab is one of a kind. Come pick yours.

Walk the floor, compare full quartzite slabs side by side, and put a hold on the one you love, confirmed by email.

Showrooms

825 Potter Street, Berkeley, CA 94710

Mon–Fri 8am–4pm, Sat 9am–2pm

(415) 767-4600

Las Vegas: 5530 S. Arville St., Suite J

Mon–Fri 8am–4pm

(702) 527-7526

18296 Andover Park West Tukwila, WA 98188